FMS900W Specifications
Dimensions
| Size |
Height |
Width |
Depth |
Weight |
| FMS900w LRU |
6.0" (152mm) |
8.0" (203mm) |
1.5" (38mm) |
4.8lbs (2.18kgm) |
| ACD215 |
6.25" (158mm) |
6.0" (152mm) |
2.5" (63mm) |
1.8lbs (0.82kgm) |
Specifications
Multi-channel VHF Voice, Data Transceiver Specifications
- 16 Watt transmitter (Class 3, 5), 20 Watt typical
- Capable of simultaneous reception of up to four channels, voice or data
- 8.33KHZ or 25KHZ Operation (Class C, E) including offset carrier
- 118 MHZ to 136.975 MHZ operation
- Upgradeable to VDL Mode 2, Mode 3, Mode 4 VHF Datalink channels without adding antennas
- Sensitivity set to –107dBm (1 microvolt)
- Auto-squelch set to –101dBm (2 Micro volts)
- Wide dynamic range receiver allows operation while offside COM is transmitting
- Meets RTCA DO-186A requirements for Class C3, E5 Certification:
- Transmitter TSO C37d Class 3, 5
- Receiver TSO C38d Class C, E
VHF Localizer Receiver Specifications
- Digital Ident Morse Code decoder
- Wide dynamic range receiver allows operation while COM is transmitting
- Flag sensitivity set to –101dBm (Actual sensitivity exceeds –107dBm)
- 108.1 MHZ to 111.95 MHZ operation
- Meets RTCA DO-195 requirements
- Certification: TSO C36e
UHF Glideslope Receiver Specifications
- Flag Sensitivity Set to –86dBm (Actual Sensitivity Exceeds –107dBm)
- 329.15 MHZ to 335.00 MHZ operation
- Meets RTCA DO-192 requirements
- Certification: TSO C34e
VOR Receiver Specifications
- Digital Ident Morse Code decoder
- Wide dynamic range receiver allows operation while COM is transmitting
- Flag sensitivity Set to –103dBm (Actual sensitivity exceeds –107dBm)
- 108.0 MHZ to 117.95 MHZ operation
- Meets RTCA DO-196 requirements
- Certification: TSO C40c
GPS Specifications
FMS900W Power
- 18-32 VDC
- 1.0 A @ 28 VDC Rvc
- 5.0 A @ 28 VDC Xmit
ACD215 Power
- 18-32 VDC
- 0.4 A @ 28 VDC Rvc
|
